Supplies: Tumbling Media: Abrasive Finishing, Inc.: Fortune Preformed Ceramic Media
Fortune Preformed Ceramic Media
Standard
Items
22° Angle Cut
Triangles
FORTUNE 22° ANGLE CUT TRIANGLES provide uniform and
effective finishing action. This media retains its basic shape throughout usage.
Triangles are most effective on flat surfaces where they provide a maximum
amount of surface contact. The angled sides provide better penetration into
corners.
Back to top
|
SP-3
|
F-33
|
H-33
|
F-36
|
AH-41
|
AX-44
|
CS-46
|
AX-65
|
AX-90
|
C
|
N
|
Size
in
inches
ABC
|
Size
in
millimeters
ABC
|
|
|
|
|
|
|
|
|
|
|
|
|
1
7/8 x 5/8
|
47.6
x 16
|
|
|
|
|
|
|
|
|
|
|
|
|
1
1/2 x 1/2
|
38
x 12.7
|
|
|
|
|
|
|
|
|
|
|
|
|
1
3/8 x 7/16
|
35
x 11
|
|
|
|
|
|
|
|
|
|
|
|
|
1
1/8 x 1
|
28.6
x 25.4
|
|
|
|
|
|
|
|
|
|
|
|
|
1
1/8 x 3/8
|
28.6
x 9.5
|
|
|
|
|
|
|
|
|
|
|
|
|
15/16
x 3/4 x 3/8
|
24
x 19 x 9.5
|
|
|
|
|
|
|
|
|
|
|
|
|
7/8
x 7/8
|
22.2
x 22.2
|
|
|
|
|
|
|
|
|
|
|
|
|
7/8
x 3/8
|
22.2
x 9.5
|
|
|
|
|
|
|
|
|
|
|
|
|
7/8
x 1/4
|
22.2
x 6.4
|
|
|
|
|
|
|
|
|
|
|
|
|
5/8
x 5/8
|
16
x 16
|
|
|
|
|
|
|
|
|
|
|
|
|
5/8
x 1/2 x 5/16
|
16
x 12.7 x 7.9
|
|
|
|
|
|
|
|
|
|
|
|
|
5/8
x 1/4
|
16
x 6.4
|
|
|
|
|
|
|
|
|
|
|
|
|
5/8
x 3/16
|
16
x 4.8
|
|
|
|
|
|
|
|
|
|
|
|
|
3/8
x 3/8
|
9.5
x 9.5
|
|
|
|
|
|
|
|
|
|
|
|
|
3/8
x 1/4
|
9.5
x 6.4
|
|
|
|
|
|
|
|
|
|
|
|
|
3/8
x 3/16
|
9.5
x 4.8
|
22° Angle Cut Cylinders
FORTUNE 22° ANGLE CUT CYLINDERS are designed to improve
finishing efficiency and results. The cylindrical shape provides a
flowing action maximizing results. Best for use on concave surfaces,
rounded areas and holes. A durable shape for use on a wide variety of
parts.
Back to top
|
F-33
|
H-33
|
AH-41
|
AX-44
|
CS-46
|
AX-65
|
AX-90
|
N
|
Size
in inches ABC
|
Size
in millimeters ABC
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
45° Angle Cut Cylinders
FORTUNE 45° ANGLE CUT CYLINDERS reach recesses, holes and
remote crevices with even greater penetration than the 22° angle cut
cylinders. Uniform shapes is maintained throughout usage.
Back to top
|
F-33
|
AH-41
|
AX-65
|
AX-90
|
Size
in
inches
ABC
|
Size
in
millimeters
ABC
|
|
|
|
|
|
5/8
x 3/4
|
16
x 19
|
|
|
|
|
|
1/2
x 5/8
|
12.7
x 16
|
|
|
|
|
|
3/8
x 5/8
|
9.5
x 16
|
|
|
|
|
|
5/16
x 5/8
|
7.9
x 16
|
|
|
|
|
|
1/4
x 5/8
|
6.4
x 16
|
45° Angle Cut Triangles
FORTUNE
45° ANGLE CUT TRIANGLES provide a sharper angle for better penetration
into remote areas. The elongated shape gives better flowing action over
the parts during processing.
Back to top
|
SP-3
|
F-33
|
AX-65
|
Size
in
inches
ABC
|
Size
in
millimeters
ABC
|
|
|
|
|
1
7/8 x 7/8
|
22.2
x 22.2
|
|
|
|
·
|
5/8
x 5/8
|
16
x 16
|
Tri-Cyls
FORTUNE TRI-CYLS are a new and versatile shape suitable for use on
a wide variety of surfaces. They have a cylindrical surface that
mates well with concave surfaces, plus two flat surfaces that
perform well on convex surfaces. TRI-CYLS combine strong points of
triangles and cylinders, to penetrate into corners, slots and
angles.
Back to top
|
AX-65
|
AX-90
|
N
|
Size
in
inches
Diameter
|
Size
in
millimeters
Diameter
|
|
·
|
·
|
|
1
1/2 x 1 1/2
|
38
x 38
|
|
·
|
·
|
·
|
5/8
x 5/8
|
16
x 16
|
|
|
·
|
·
|
3/8
x 3/8
|
9.5
x 9.5
|
22° Angle Cut Ellipse
FORTUNE ELLIPTICAL SHAPED MEDIA combines the finishing
action of a flat shape with the flowing action of a cylindrical shape.
Especially effective on concave surfaces. The elliptical shape has
anti-wedging characteristics that reduce or eliminate lodging problems.
Back to top
|
SP-3
|
F-33
|
H-33
|
Size
in
inches
ABC
|
Size
in
millimeters
ABC
|
|
|
|
|
1
x 7/16 x 1
|
26
x 11 x 26
|
|
|
|
|
3/4
x 3/8 x 1
|
19
x 9.5 x 26
|
|
|
|
|
9/16
x 1/4 x 7/8
|
14.3
x 6.4 x 22.2
|
|
|
|
|
7/16
x 3/16 x 5/8
|
11
x 4.8 x 16
|
|
|
|
|
5/16
x 3/16 x 1/2
|
7.9
x 4.8 x 12.7
|
Spheres
FORTUNE SPHERES have a smooth rolling action enabling them
to easily roll around and through parts to produce cleaning and blending
action. Will not nick or scratch parts. Spheres give good contact in
rounded areas.
Back to top
|
AX-99
|
Size
in
inches
Diameter
|
Size
in
millimeters
Diameter
|
|
|
13/16
|
20.6
|
|
|
11/16
|
17.5
|
|
|
9/16
|
14.4
|
|
|
7/16
|
11
|
|
|
11/32
|
8.7
|
|
|
9/32
|
7
|
|
|
7/32
|
5.5
|
|
|
11/64
|
4.4
|
22° Angle Cut Tristars
FORTUNE ANGLE CUT
TRISTARS have the basic capabilities of a triangle, along with sharp
points for reaching into remote areas. A universal application media
that can deburr hard to get at areas, such as gear teeth, slots or sharp
corners.
Back to top
|
AH-41
|
AX-65
|
AX-90
|
Size
in
inches
ABC
|
Size
in
millimeters
ABC
|
|
|
|
|
1
7/8 x 5/8
|
47.6
x 16
|
|
|
|
|
1
3/8 x 7/16
|
35
x 11
|
|
|
|
|
1
1/8 x 3/8
|
28.6
x 9.5
|
|
|
|
|
7/16
x 5/16
|
22.2
x 7.9
|
|
|
|
|
5/8
x 1/4
|
16
x 6.4
|
Triangles, Straight Cut
FORTUNE STRAIGHT CUT
TRIANGLES provide maximum surface contact on flat surfaces. The straight
sided shape gives a blocky action that helps maximize the cutting
action.
Back to top
|
AH-41
|
AX-44
|
CS-46
|
AX-99
|
N
|
Size
in
inches
A B
|
Size
in
millimeters
A B
|
|
|
|
|
|
|
2
x 1
|
50.5
x 25.4
|
|
|
|
|
|
|
2
x 2
|
50.8
x 50.8
|
|
|
|
|
|
|
1/4
x 1/4
|
6.4
x 6.4
|
|
|
|
|
|
|
3/16
x 3/16
|
4.8
x 4.8
|
|
|
|
|
|
|
3/16
x 1/2
|
4.8
x 12.7
|
Microbrite
A very hard and dense media.
For burnishing and polishing. Excellent flowing action. Must be broken in to
achieve best results.
